Merge branch 'esp32': ESP32-S3-BOX-3 room satellite with voice pipeline
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
This commit is contained in:
Aodhan Collins
24
TODO.md
24
TODO.md
@@ -108,17 +108,19 @@
|
||||
|
||||
### P6 · homeai-esp32
|
||||
|
||||
- [ ] Install ESPHome: `pip install esphome`
|
||||
- [ ] Write `esphome/secrets.yaml` (gitignored)
|
||||
- [ ] Write `base.yaml`, `voice.yaml`, `display.yaml`, `animations.yaml`
|
||||
- [ ] Write `s3-box-living-room.yaml` for first unit
|
||||
- [ ] Flash first unit via USB
|
||||
- [ ] Verify unit appears in HA device list
|
||||
- [ ] Assign Wyoming voice pipeline to unit in HA
|
||||
- [ ] Test full wake → STT → LLM → TTS → audio playback cycle
|
||||
- [ ] Test LVGL face: idle → listening → thinking → speaking → error
|
||||
- [ ] Verify OTA firmware update works wirelessly
|
||||
- [ ] Flash remaining units (bedroom, kitchen, etc.)
|
||||
- [x] Install ESPHome in `~/homeai-esphome-env` (Python 3.12 venv)
|
||||
- [x] Write `esphome/secrets.yaml` (gitignored)
|
||||
- [x] Write `homeai-living-room.yaml` (based on official S3-BOX-3 reference config)
|
||||
- [x] Generate placeholder face illustrations (7 PNGs, 320×240)
|
||||
- [x] Write `setup.sh` with flash/ota/logs/validate commands
|
||||
- [x] Write `deploy.sh` with OTA deploy, image management, multi-unit support
|
||||
- [x] Flash first unit via USB (living room)
|
||||
- [x] Verify unit appears in HA device list (requires HA 2026.x for ESPHome 2025.12+ compat)
|
||||
- [x] Assign Wyoming voice pipeline to unit in HA
|
||||
- [x] Test full wake → STT → LLM → TTS → audio playback cycle
|
||||
- [x] Test display states: idle → listening → thinking → replying → error
|
||||
- [x] Verify OTA firmware update works wirelessly (`deploy.sh --device OTA`)
|
||||
- [ ] Flash remaining units (bedroom, kitchen)
|
||||
- [ ] Document MAC address → room name mapping
|
||||
|
||||
---
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
|
||||
## Goal
|
||||
|
||||
Flash ESP32-S3-BOX-3 units with ESPHome. Each unit acts as a dumb room satellite: always-on mic, local wake word detection, audio playback, and an LVGL animated face showing assistant state. All intelligence stays on the Mac Mini.
|
||||
Flash ESP32-S3-BOX-3 units with ESPHome. Each unit acts as a dumb room satellite: always-on mic, on-device wake word detection, audio playback, and a display showing assistant state via static PNG face illustrations. All intelligence stays on the Mac Mini.
|
||||
|
||||
---
|
||||
|
||||
@@ -17,11 +17,12 @@ Flash ESP32-S3-BOX-3 units with ESPHome. Each unit acts as a dumb room satellite
|
||||
| SoC | ESP32-S3 (dual-core Xtensa, 240MHz) |
|
||||
| RAM | 512KB SRAM + 16MB PSRAM |
|
||||
| Flash | 16MB |
|
||||
| Display | 2.4" IPS LCD, 320×240, touchscreen |
|
||||
| Mic | Dual microphone array |
|
||||
| Speaker | Built-in 1W speaker |
|
||||
| Connectivity | WiFi 802.11b/g/n, BT 5.0 |
|
||||
| USB | USB-C (programming + power) |
|
||||
| Display | 2.4" IPS LCD, 320×240, touchscreen (ILI9xxx, model S3BOX) |
|
||||
| Audio ADC | ES7210 (dual mic array, 16kHz 16-bit) |
|
||||
| Audio DAC | ES8311 (speaker output, 48kHz 16-bit) |
|
||||
| Speaker | Built-in 1W |
|
||||
| Connectivity | WiFi 802.11b/g/n (2.4GHz only), BT 5.0 |
|
||||
| USB | USB-C (programming + power, native USB JTAG serial) |
|
||||
|
||||
---
|
||||
|
||||
@@ -29,273 +30,86 @@ Flash ESP32-S3-BOX-3 units with ESPHome. Each unit acts as a dumb room satellite
|
||||
|
||||
```
|
||||
ESP32-S3-BOX-3
|
||||
├── microWakeWord (on-device, always listening)
|
||||
│ └── triggers Wyoming Satellite on wake detection
|
||||
├── Wyoming Satellite
|
||||
│ ├── streams mic audio → Mac Mini Wyoming STT (port 10300)
|
||||
│ └── receives TTS audio ← Mac Mini Wyoming TTS (port 10301)
|
||||
├── LVGL Display
|
||||
│ └── animated face, driven by HA entity state
|
||||
├── micro_wake_word (on-device, always listening)
|
||||
│ └── "hey_jarvis" — triggers voice_assistant on wake detection
|
||||
├── voice_assistant (ESPHome component)
|
||||
│ ├── connects to Home Assistant via ESPHome API
|
||||
│ ├── HA routes audio → Mac Mini Wyoming STT (10.0.0.101:10300)
|
||||
│ ├── HA routes text → OpenClaw conversation agent (10.0.0.101:8081)
|
||||
│ └── HA routes response → Mac Mini Wyoming TTS (10.0.0.101:10301)
|
||||
├── Display (ili9xxx, model S3BOX, 320×240)
|
||||
│ └── static PNG faces per state (idle, listening, thinking, replying, error)
|
||||
└── ESPHome OTA
|
||||
└── firmware updates over WiFi
|
||||
```
|
||||
|
||||
---
|
||||
|
||||
## Pin Map (ESP32-S3-BOX-3)
|
||||
|
||||
| Function | Pin(s) | Notes |
|
||||
|---|---|---|
|
||||
| I2S LRCLK | GPIO45 | strapping pin — warning ignored |
|
||||
| I2S BCLK | GPIO17 | |
|
||||
| I2S MCLK | GPIO2 | |
|
||||
| I2S DIN (mic) | GPIO16 | ES7210 ADC input |
|
||||
| I2S DOUT (speaker) | GPIO15 | ES8311 DAC output |
|
||||
| Speaker enable | GPIO46 | strapping pin — warning ignored |
|
||||
| I2C SCL | GPIO18 | audio codec control bus |
|
||||
| I2C SDA | GPIO8 | audio codec control bus |
|
||||
| SPI CLK (display) | GPIO7 | |
|
||||
| SPI MOSI (display) | GPIO6 | |
|
||||
| Display CS | GPIO5 | |
|
||||
| Display DC | GPIO4 | |
|
||||
| Display Reset | GPIO48 | inverted |
|
||||
| Backlight | GPIO47 | LEDC PWM |
|
||||
| Left top button | GPIO0 | strapping pin — mute toggle / factory reset |
|
||||
|
||||
---
|
||||
|
||||
## ESPHome Configuration
|
||||
|
||||
### Base Config Template
|
||||
|
||||
`esphome/base.yaml` — shared across all units:
|
||||
### Platform & Framework
|
||||
|
||||
```yaml
|
||||
esphome:
|
||||
name: homeai-${room}
|
||||
friendly_name: "HomeAI ${room_display}"
|
||||
platform: esp32
|
||||
board: esp32-s3-box-3
|
||||
esp32:
|
||||
board: esp32s3box
|
||||
flash_size: 16MB
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
sdkconfig_options:
|
||||
CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240: "y"
|
||||
CONFIG_ESP32S3_DATA_CACHE_64KB: "y"
|
||||
CONFIG_ESP32S3_DATA_CACHE_LINE_64B: "y"
|
||||
|
||||
wifi:
|
||||
ssid: !secret wifi_ssid
|
||||
password: !secret wifi_password
|
||||
ap:
|
||||
ssid: "HomeAI Fallback"
|
||||
|
||||
api:
|
||||
encryption:
|
||||
key: !secret api_key
|
||||
|
||||
ota:
|
||||
password: !secret ota_password
|
||||
|
||||
logger:
|
||||
level: INFO
|
||||
psram:
|
||||
mode: octal
|
||||
speed: 80MHz
|
||||
```
|
||||
|
||||
### Room-Specific Config
|
||||
### Audio Stack
|
||||
|
||||
`esphome/s3-box-living-room.yaml`:
|
||||
Uses `i2s_audio` platform with external ADC/DAC codec chips:
|
||||
|
||||
```yaml
|
||||
substitutions:
|
||||
room: living-room
|
||||
room_display: "Living Room"
|
||||
mac_mini_ip: "192.168.1.x" # or Tailscale IP
|
||||
- **Microphone**: ES7210 ADC via I2S, 16kHz 16-bit mono
|
||||
- **Speaker**: ES8311 DAC via I2S, 48kHz 16-bit mono (left channel)
|
||||
- **Media player**: wraps speaker with volume control (min 50%, max 85%)
|
||||
|
||||
packages:
|
||||
base: !include base.yaml
|
||||
voice: !include voice.yaml
|
||||
display: !include display.yaml
|
||||
```
|
||||
### Wake Word
|
||||
|
||||
One file per room, only the substitutions change.
|
||||
On-device `micro_wake_word` component with `hey_jarvis` model. Can optionally be switched to Home Assistant streaming wake word via a selector entity.
|
||||
|
||||
### Voice / Wyoming Satellite — `esphome/voice.yaml`
|
||||
### Display
|
||||
|
||||
```yaml
|
||||
microphone:
|
||||
- platform: esp_adf
|
||||
id: mic
|
||||
`ili9xxx` platform with model `S3BOX`. Uses `update_interval: never` — display updates are triggered by scripts on voice assistant state changes. Static 320×240 PNG images for each state are compiled into firmware.
|
||||
|
||||
speaker:
|
||||
- platform: esp_adf
|
||||
id: spk
|
||||
### Voice Assistant
|
||||
|
||||
micro_wake_word:
|
||||
model: hey_jarvis # or custom model path
|
||||
on_wake_word_detected:
|
||||
- voice_assistant.start:
|
||||
|
||||
voice_assistant:
|
||||
microphone: mic
|
||||
speaker: spk
|
||||
noise_suppression_level: 2
|
||||
auto_gain: 31dBFS
|
||||
volume_multiplier: 2.0
|
||||
|
||||
on_listening:
|
||||
- display.page.show: page_listening
|
||||
- script.execute: animate_face_listening
|
||||
|
||||
on_stt_vad_end:
|
||||
- display.page.show: page_thinking
|
||||
- script.execute: animate_face_thinking
|
||||
|
||||
on_tts_start:
|
||||
- display.page.show: page_speaking
|
||||
- script.execute: animate_face_speaking
|
||||
|
||||
on_end:
|
||||
- display.page.show: page_idle
|
||||
- script.execute: animate_face_idle
|
||||
|
||||
on_error:
|
||||
- display.page.show: page_error
|
||||
- script.execute: animate_face_error
|
||||
```
|
||||
|
||||
**Note:** ESPHome's `voice_assistant` component connects to HA, which routes to Wyoming STT/TTS on the Mac Mini. This is the standard ESPHome → HA → Wyoming path.
|
||||
|
||||
### LVGL Display — `esphome/display.yaml`
|
||||
|
||||
```yaml
|
||||
display:
|
||||
- platform: ili9xxx
|
||||
model: ILI9341
|
||||
id: lcd
|
||||
cs_pin: GPIO5
|
||||
dc_pin: GPIO4
|
||||
reset_pin: GPIO48
|
||||
|
||||
touchscreen:
|
||||
- platform: tt21100
|
||||
id: touch
|
||||
|
||||
lvgl:
|
||||
displays:
|
||||
- lcd
|
||||
touchscreens:
|
||||
- touch
|
||||
|
||||
# Face widget — centered on screen
|
||||
widgets:
|
||||
- obj:
|
||||
id: face_container
|
||||
width: 320
|
||||
height: 240
|
||||
bg_color: 0x000000
|
||||
children:
|
||||
# Eyes (two circles)
|
||||
- obj:
|
||||
id: eye_left
|
||||
x: 90
|
||||
y: 90
|
||||
width: 50
|
||||
height: 50
|
||||
radius: 25
|
||||
bg_color: 0xFFFFFF
|
||||
- obj:
|
||||
id: eye_right
|
||||
x: 180
|
||||
y: 90
|
||||
width: 50
|
||||
height: 50
|
||||
radius: 25
|
||||
bg_color: 0xFFFFFF
|
||||
# Mouth (line/arc)
|
||||
- arc:
|
||||
id: mouth
|
||||
x: 110
|
||||
y: 160
|
||||
width: 100
|
||||
height: 40
|
||||
start_angle: 180
|
||||
end_angle: 360
|
||||
arc_color: 0xFFFFFF
|
||||
|
||||
pages:
|
||||
- id: page_idle
|
||||
- id: page_listening
|
||||
- id: page_thinking
|
||||
- id: page_speaking
|
||||
- id: page_error
|
||||
```
|
||||
|
||||
### LVGL Face State Animations — `esphome/animations.yaml`
|
||||
|
||||
```yaml
|
||||
script:
|
||||
- id: animate_face_idle
|
||||
then:
|
||||
- lvgl.widget.modify:
|
||||
id: eye_left
|
||||
height: 50 # normal open
|
||||
- lvgl.widget.modify:
|
||||
id: eye_right
|
||||
height: 50
|
||||
- lvgl.widget.modify:
|
||||
id: mouth
|
||||
arc_color: 0xFFFFFF
|
||||
|
||||
- id: animate_face_listening
|
||||
then:
|
||||
- lvgl.widget.modify:
|
||||
id: eye_left
|
||||
height: 60 # wider eyes
|
||||
- lvgl.widget.modify:
|
||||
id: eye_right
|
||||
height: 60
|
||||
- lvgl.widget.modify:
|
||||
id: mouth
|
||||
arc_color: 0x00BFFF # blue tint
|
||||
|
||||
- id: animate_face_thinking
|
||||
then:
|
||||
- lvgl.widget.modify:
|
||||
id: eye_left
|
||||
height: 20 # squinting
|
||||
- lvgl.widget.modify:
|
||||
id: eye_right
|
||||
height: 20
|
||||
|
||||
- id: animate_face_speaking
|
||||
then:
|
||||
- lvgl.widget.modify:
|
||||
id: mouth
|
||||
arc_color: 0x00FF88 # green speaking indicator
|
||||
|
||||
- id: animate_face_error
|
||||
then:
|
||||
- lvgl.widget.modify:
|
||||
id: eye_left
|
||||
bg_color: 0xFF2200 # red eyes
|
||||
- lvgl.widget.modify:
|
||||
id: eye_right
|
||||
bg_color: 0xFF2200
|
||||
```
|
||||
|
||||
> **Note:** True lip-sync animation (mouth moving with audio) is complex on ESP32. Phase 1: static states. Phase 2: amplitude-driven mouth height using speaker volume feedback.
|
||||
|
||||
---
|
||||
|
||||
## Secrets File
|
||||
|
||||
`esphome/secrets.yaml` (gitignored):
|
||||
|
||||
```yaml
|
||||
wifi_ssid: "YourNetwork"
|
||||
wifi_password: "YourPassword"
|
||||
api_key: "<32-byte base64 key>"
|
||||
ota_password: "YourOTAPassword"
|
||||
```
|
||||
|
||||
---
|
||||
|
||||
## Flash & Deployment Workflow
|
||||
|
||||
```bash
|
||||
# Install ESPHome
|
||||
pip install esphome
|
||||
|
||||
# Compile + flash via USB (first time)
|
||||
esphome run esphome/s3-box-living-room.yaml
|
||||
|
||||
# OTA update (subsequent)
|
||||
esphome upload esphome/s3-box-living-room.yaml --device <device-ip>
|
||||
|
||||
# View logs
|
||||
esphome logs esphome/s3-box-living-room.yaml
|
||||
```
|
||||
|
||||
---
|
||||
|
||||
## Home Assistant Integration
|
||||
|
||||
After flashing:
|
||||
1. HA discovers ESP32 automatically via mDNS
|
||||
2. Add device in HA → Settings → Devices
|
||||
3. Assign Wyoming voice assistant pipeline to the device
|
||||
4. Set up room-specific automations (e.g., "Living Room" light control from that satellite)
|
||||
ESPHome's `voice_assistant` component connects to HA via the ESPHome native API (not directly to Wyoming). HA orchestrates the pipeline:
|
||||
1. Audio → Wyoming STT (Mac Mini) → text
|
||||
2. Text → OpenClaw conversation agent → response
|
||||
3. Response → Wyoming TTS (Mac Mini) → audio back to ESP32
|
||||
|
||||
---
|
||||
|
||||
@@ -303,43 +117,71 @@ After flashing:
|
||||
|
||||
```
|
||||
homeai-esp32/
|
||||
├── PLAN.md
|
||||
├── setup.sh # env check + flash/ota/logs commands
|
||||
└── esphome/
|
||||
├── base.yaml
|
||||
├── voice.yaml
|
||||
├── display.yaml
|
||||
├── animations.yaml
|
||||
├── s3-box-living-room.yaml
|
||||
├── s3-box-bedroom.yaml # template, fill in when hardware available
|
||||
├── s3-box-kitchen.yaml # template
|
||||
└── secrets.yaml # gitignored
|
||||
├── secrets.yaml # gitignored — WiFi + API key
|
||||
├── homeai-living-room.yaml # first unit (full config)
|
||||
├── homeai-bedroom.yaml # future: copy + change substitutions
|
||||
├── homeai-kitchen.yaml # future: copy + change substitutions
|
||||
└── illustrations/ # 320×240 PNG face images
|
||||
├── idle.png
|
||||
├── loading.png
|
||||
├── listening.png
|
||||
├── thinking.png
|
||||
├── replying.png
|
||||
├── error.png
|
||||
└── timer_finished.png
|
||||
```
|
||||
|
||||
---
|
||||
|
||||
## Wake Word Decisions
|
||||
## ESPHome Environment
|
||||
|
||||
```bash
|
||||
# Dedicated venv (Python 3.12) — do NOT share with voice/whisper venvs
|
||||
~/homeai-esphome-env/bin/esphome version # ESPHome 2026.2.4+
|
||||
|
||||
# Quick commands
|
||||
cd ~/gitea/homeai/homeai-esp32
|
||||
~/homeai-esphome-env/bin/esphome run esphome/homeai-living-room.yaml # compile + flash
|
||||
~/homeai-esphome-env/bin/esphome logs esphome/homeai-living-room.yaml # stream logs
|
||||
|
||||
# Or use the setup script
|
||||
./setup.sh flash # compile + USB flash
|
||||
./setup.sh ota # compile + OTA update
|
||||
./setup.sh logs # stream device logs
|
||||
./setup.sh validate # check YAML without compiling
|
||||
```
|
||||
|
||||
---
|
||||
|
||||
## Wake Word Options
|
||||
|
||||
| Option | Latency | Privacy | Effort |
|
||||
|---|---|---|---|
|
||||
| `hey_jarvis` (built-in microWakeWord) | ~200ms | On-device | Zero |
|
||||
| `hey_jarvis` (built-in micro_wake_word) | ~200ms | On-device | Zero |
|
||||
| Custom word (trained model) | ~200ms | On-device | High — requires 50+ recordings |
|
||||
| Mac Mini openWakeWord (stream audio) | ~500ms | On Mac | Medium |
|
||||
| HA streaming wake word | ~500ms | On Mac Mini | Medium — stream all audio |
|
||||
|
||||
**Recommendation:** Start with `hey_jarvis`. Train a custom word (character's name) once character name is finalised.
|
||||
**Current**: `hey_jarvis` on-device. Train a custom word (character's name) once finalised.
|
||||
|
||||
---
|
||||
|
||||
## Implementation Steps
|
||||
|
||||
- [ ] Install ESPHome: `pip install esphome`
|
||||
- [ ] Write `esphome/secrets.yaml` (gitignored)
|
||||
- [ ] Write `base.yaml`, `voice.yaml`, `display.yaml`, `animations.yaml`
|
||||
- [ ] Write `s3-box-living-room.yaml` for first unit
|
||||
- [ ] Flash first unit via USB: `esphome run s3-box-living-room.yaml`
|
||||
- [ ] Verify unit appears in HA device list
|
||||
- [ ] Assign Wyoming voice pipeline to unit in HA
|
||||
- [ ] Test: speak wake word → transcription → LLM response → spoken reply
|
||||
- [ ] Test: LVGL face cycles through idle → listening → thinking → speaking
|
||||
- [ ] Verify OTA update works: change LVGL color, deploy wirelessly
|
||||
- [x] Install ESPHome in `~/homeai-esphome-env` (Python 3.12)
|
||||
- [x] Write `esphome/secrets.yaml` (gitignored)
|
||||
- [x] Write `homeai-living-room.yaml` (based on official S3-BOX-3 reference config)
|
||||
- [x] Generate placeholder face illustrations (7 PNGs, 320×240)
|
||||
- [x] Write `setup.sh` with flash/ota/logs/validate commands
|
||||
- [x] Write `deploy.sh` with OTA deploy, image management, multi-unit support
|
||||
- [x] Flash first unit via USB (living room)
|
||||
- [x] Verify unit appears in HA device list
|
||||
- [x] Assign Wyoming voice pipeline to unit in HA
|
||||
- [x] Test: speak wake word → transcription → LLM response → spoken reply
|
||||
- [x] Test: display cycles through idle → listening → thinking → replying
|
||||
- [x] Verify OTA update works: change config, deploy wirelessly
|
||||
- [ ] Write config templates for remaining rooms (bedroom, kitchen)
|
||||
- [ ] Flash remaining units, verify each works independently
|
||||
- [ ] Document final MAC address → room name mapping
|
||||
@@ -351,7 +193,17 @@ homeai-esp32/
|
||||
- [ ] Wake word "hey jarvis" triggers pipeline reliably from 3m distance
|
||||
- [ ] STT transcription accuracy >90% for clear speech in quiet room
|
||||
- [ ] TTS audio plays clearly through ESP32 speaker
|
||||
- [ ] LVGL face shows correct state for idle / listening / thinking / speaking / error
|
||||
- [ ] Display shows correct state for idle / listening / thinking / replying / error / muted
|
||||
- [ ] OTA firmware updates work without USB cable
|
||||
- [ ] Unit reconnects automatically after WiFi drop
|
||||
- [ ] Unit survives power cycle and resumes normal operation
|
||||
|
||||
---
|
||||
|
||||
## Known Constraints
|
||||
|
||||
- **Memory**: voice_assistant + micro_wake_word + display is near the limit. Do NOT add Bluetooth or LVGL widgets — they will cause crashes.
|
||||
- **WiFi**: 2.4GHz only. 5GHz networks are not supported.
|
||||
- **Speaker**: 1W built-in. Volume capped at 85% to avoid distortion.
|
||||
- **Display**: Static PNGs compiled into firmware. To change images, reflash via OTA (~1-2 min).
|
||||
- **First compile**: Downloads ESP-IDF toolchain (~500MB), takes 5-10 minutes. Incremental builds are 1-2 minutes.
|
||||
|
||||
244
homeai-esp32/deploy.sh
Executable file
244
homeai-esp32/deploy.sh
Executable file
@@ -0,0 +1,244 @@
|
||||
#!/usr/bin/env bash
|
||||
# homeai-esp32/deploy.sh — Quick OTA deploy for ESP32-S3-BOX-3 satellites
|
||||
#
|
||||
# Usage:
|
||||
# ./deploy.sh — deploy config + images to living room (default)
|
||||
# ./deploy.sh bedroom — deploy to bedroom unit
|
||||
# ./deploy.sh --images-only — deploy existing PNGs from illustrations/ (no regen)
|
||||
# ./deploy.sh --regen-images — regenerate placeholder PNGs then deploy
|
||||
# ./deploy.sh --validate — validate config without deploying
|
||||
# ./deploy.sh --all — deploy to all configured units
|
||||
#
|
||||
# Images are compiled into firmware, so any PNG changes require a reflash.
|
||||
# To use custom images: drop 320x240 PNGs into esphome/illustrations/ then ./deploy.sh
|
||||
|
||||
set -euo pipefail
|
||||
|
||||
SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
|
||||
ESPHOME_DIR="${SCRIPT_DIR}/esphome"
|
||||
ESPHOME_VENV="${HOME}/homeai-esphome-env"
|
||||
ESPHOME="${ESPHOME_VENV}/bin/esphome"
|
||||
PYTHON="${ESPHOME_VENV}/bin/python3"
|
||||
ILLUSTRATIONS_DIR="${ESPHOME_DIR}/illustrations"
|
||||
|
||||
# Colors
|
||||
RED='\033[0;31m'
|
||||
GREEN='\033[0;32m'
|
||||
YELLOW='\033[1;33m'
|
||||
BLUE='\033[0;34m'
|
||||
CYAN='\033[0;36m'
|
||||
NC='\033[0m'
|
||||
|
||||
log_info() { echo -e "${BLUE}[INFO]${NC} $*"; }
|
||||
log_ok() { echo -e "${GREEN}[OK]${NC} $*"; }
|
||||
log_warn() { echo -e "${YELLOW}[WARN]${NC} $*"; }
|
||||
log_error() { echo -e "${RED}[ERROR]${NC} $*"; exit 1; }
|
||||
log_step() { echo -e "${CYAN}[STEP]${NC} $*"; }
|
||||
|
||||
# ─── Available units ──────────────────────────────────────────────────────────
|
||||
|
||||
UNIT_NAMES=(living-room bedroom kitchen)
|
||||
DEFAULT_UNIT="living-room"
|
||||
|
||||
unit_config() {
|
||||
case "$1" in
|
||||
living-room) echo "homeai-living-room.yaml" ;;
|
||||
bedroom) echo "homeai-bedroom.yaml" ;;
|
||||
kitchen) echo "homeai-kitchen.yaml" ;;
|
||||
*) echo "" ;;
|
||||
esac
|
||||
}
|
||||
|
||||
unit_list() {
|
||||
echo "${UNIT_NAMES[*]}"
|
||||
}
|
||||
|
||||
# ─── Face image generator ────────────────────────────────────────────────────
|
||||
|
||||
generate_faces() {
|
||||
log_step "Generating face illustrations (320x240 PNG)..."
|
||||
"${PYTHON}" << 'PYEOF'
|
||||
from PIL import Image, ImageDraw
|
||||
import os
|
||||
|
||||
WIDTH, HEIGHT = 320, 240
|
||||
OUT = os.environ.get("ILLUSTRATIONS_DIR", "esphome/illustrations")
|
||||
|
||||
def draw_face(draw, eye_color, mouth_color, eye_height=40, eye_y=80, mouth_style="smile"):
|
||||
ex1, ey1 = 95, eye_y
|
||||
draw.ellipse([ex1-25, ey1-eye_height//2, ex1+25, ey1+eye_height//2], fill=eye_color)
|
||||
ex2, ey2 = 225, eye_y
|
||||
draw.ellipse([ex2-25, ey2-eye_height//2, ex2+25, ey2+eye_height//2], fill=eye_color)
|
||||
if mouth_style == "smile":
|
||||
draw.arc([110, 140, 210, 200], start=0, end=180, fill=mouth_color, width=3)
|
||||
elif mouth_style == "open":
|
||||
draw.ellipse([135, 150, 185, 190], fill=mouth_color)
|
||||
elif mouth_style == "flat":
|
||||
draw.line([120, 170, 200, 170], fill=mouth_color, width=3)
|
||||
elif mouth_style == "frown":
|
||||
draw.arc([110, 160, 210, 220], start=180, end=360, fill=mouth_color, width=3)
|
||||
|
||||
states = {
|
||||
"idle": {"eye_color": "#FFFFFF", "mouth_color": "#FFFFFF", "eye_height": 40, "mouth_style": "smile"},
|
||||
"loading": {"eye_color": "#6366F1", "mouth_color": "#6366F1", "eye_height": 30, "mouth_style": "flat"},
|
||||
"listening": {"eye_color": "#00BFFF", "mouth_color": "#00BFFF", "eye_height": 50, "mouth_style": "open"},
|
||||
"thinking": {"eye_color": "#A78BFA", "mouth_color": "#A78BFA", "eye_height": 20, "mouth_style": "flat"},
|
||||
"replying": {"eye_color": "#10B981", "mouth_color": "#10B981", "eye_height": 40, "mouth_style": "open"},
|
||||
"error": {"eye_color": "#EF4444", "mouth_color": "#EF4444", "eye_height": 40, "mouth_style": "frown"},
|
||||
"timer_finished": {"eye_color": "#F59E0B", "mouth_color": "#F59E0B", "eye_height": 50, "mouth_style": "smile"},
|
||||
}
|
||||
|
||||
os.makedirs(OUT, exist_ok=True)
|
||||
for name, p in states.items():
|
||||
img = Image.new("RGBA", (WIDTH, HEIGHT), (0, 0, 0, 255))
|
||||
draw = ImageDraw.Draw(img)
|
||||
draw_face(draw, p["eye_color"], p["mouth_color"], p["eye_height"], mouth_style=p["mouth_style"])
|
||||
img.save(f"{OUT}/{name}.png")
|
||||
print(f" {name}.png")
|
||||
PYEOF
|
||||
log_ok "Generated 7 face illustrations"
|
||||
}
|
||||
|
||||
# ─── Check existing images ───────────────────────────────────────────────────
|
||||
|
||||
REQUIRED_IMAGES=(idle loading listening thinking replying error timer_finished)
|
||||
|
||||
check_images() {
|
||||
local missing=()
|
||||
for name in "${REQUIRED_IMAGES[@]}"; do
|
||||
if [[ ! -f "${ILLUSTRATIONS_DIR}/${name}.png" ]]; then
|
||||
missing+=("${name}.png")
|
||||
fi
|
||||
done
|
||||
|
||||
if [[ ${#missing[@]} -gt 0 ]]; then
|
||||
log_error "Missing illustrations: ${missing[*]}
|
||||
Place 320x240 PNGs in ${ILLUSTRATIONS_DIR}/ or use --regen-images to generate placeholders."
|
||||
fi
|
||||
|
||||
log_ok "All ${#REQUIRED_IMAGES[@]} illustrations present in illustrations/"
|
||||
for name in "${REQUIRED_IMAGES[@]}"; do
|
||||
local size
|
||||
size=$(wc -c < "${ILLUSTRATIONS_DIR}/${name}.png" | tr -d ' ')
|
||||
echo -e " ${name}.png (${size} bytes)"
|
||||
done
|
||||
}
|
||||
|
||||
# ─── Deploy to a single unit ─────────────────────────────────────────────────
|
||||
|
||||
deploy_unit() {
|
||||
local unit_name="$1"
|
||||
local config
|
||||
config="$(unit_config "$unit_name")"
|
||||
|
||||
if [[ -z "$config" ]]; then
|
||||
log_error "Unknown unit: ${unit_name}. Available: $(unit_list)"
|
||||
fi
|
||||
|
||||
local config_path="${ESPHOME_DIR}/${config}"
|
||||
if [[ ! -f "$config_path" ]]; then
|
||||
log_error "Config not found: ${config_path}"
|
||||
fi
|
||||
|
||||
log_step "Validating ${config}..."
|
||||
cd "${ESPHOME_DIR}"
|
||||
"${ESPHOME}" config "${config}" > /dev/null
|
||||
log_ok "Config valid"
|
||||
|
||||
log_step "Compiling + OTA deploying ${config}..."
|
||||
"${ESPHOME}" run "${config}" --device OTA 2>&1
|
||||
log_ok "Deployed to ${unit_name}"
|
||||
}
|
||||
|
||||
# ─── Main ─────────────────────────────────────────────────────────────────────
|
||||
|
||||
IMAGES_ONLY=false
|
||||
REGEN_IMAGES=false
|
||||
VALIDATE_ONLY=false
|
||||
DEPLOY_ALL=false
|
||||
TARGET="${DEFAULT_UNIT}"
|
||||
|
||||
while [[ $# -gt 0 ]]; do
|
||||
case "$1" in
|
||||
--images-only) IMAGES_ONLY=true; shift ;;
|
||||
--regen-images) REGEN_IMAGES=true; shift ;;
|
||||
--validate) VALIDATE_ONLY=true; shift ;;
|
||||
--all) DEPLOY_ALL=true; shift ;;
|
||||
--help|-h)
|
||||
echo "Usage: $0 [unit-name] [--images-only] [--regen-images] [--validate] [--all]"
|
||||
echo ""
|
||||
echo "Units: $(unit_list)"
|
||||
echo ""
|
||||
echo "Options:"
|
||||
echo " --images-only Deploy existing PNGs from illustrations/ (for custom images)"
|
||||
echo " --regen-images Regenerate placeholder face PNGs then deploy"
|
||||
echo " --validate Validate config without deploying"
|
||||
echo " --all Deploy to all configured units"
|
||||
echo ""
|
||||
echo "Examples:"
|
||||
echo " $0 # deploy config to living-room"
|
||||
echo " $0 bedroom # deploy to bedroom"
|
||||
echo " $0 --images-only # deploy with current images (custom or generated)"
|
||||
echo " $0 --regen-images # regenerate placeholder faces + deploy"
|
||||
echo " $0 --all # deploy to all units"
|
||||
echo ""
|
||||
echo "Custom images: drop 320x240 PNGs into esphome/illustrations/"
|
||||
echo "Required files: ${REQUIRED_IMAGES[*]}"
|
||||
exit 0
|
||||
;;
|
||||
*)
|
||||
if [[ -n "$(unit_config "$1")" ]]; then
|
||||
TARGET="$1"
|
||||
else
|
||||
log_error "Unknown option or unit: $1. Use --help for usage."
|
||||
fi
|
||||
shift
|
||||
;;
|
||||
esac
|
||||
done
|
||||
|
||||
# Check ESPHome
|
||||
if [[ ! -x "${ESPHOME}" ]]; then
|
||||
log_error "ESPHome not found at ${ESPHOME}. Run setup.sh first."
|
||||
fi
|
||||
|
||||
# Regenerate placeholder images if requested
|
||||
if $REGEN_IMAGES; then
|
||||
export ILLUSTRATIONS_DIR
|
||||
generate_faces
|
||||
fi
|
||||
|
||||
# Check existing images if deploying with --images-only (or always before deploy)
|
||||
if $IMAGES_ONLY; then
|
||||
check_images
|
||||
fi
|
||||
|
||||
# Validate only
|
||||
if $VALIDATE_ONLY; then
|
||||
cd "${ESPHOME_DIR}"
|
||||
for unit_name in "${UNIT_NAMES[@]}"; do
|
||||
config="$(unit_config "$unit_name")"
|
||||
if [[ -f "${config}" ]]; then
|
||||
log_step "Validating ${config}..."
|
||||
"${ESPHOME}" config "${config}" > /dev/null && log_ok "${config} valid" || log_warn "${config} invalid"
|
||||
fi
|
||||
done
|
||||
exit 0
|
||||
fi
|
||||
|
||||
# Deploy
|
||||
if $DEPLOY_ALL; then
|
||||
for unit_name in "${UNIT_NAMES[@]}"; do
|
||||
config="$(unit_config "$unit_name")"
|
||||
if [[ -f "${ESPHOME_DIR}/${config}" ]]; then
|
||||
deploy_unit "$unit_name"
|
||||
else
|
||||
log_warn "Skipping ${unit_name} — ${config} not found"
|
||||
fi
|
||||
done
|
||||
else
|
||||
deploy_unit "$TARGET"
|
||||
fi
|
||||
|
||||
echo ""
|
||||
log_ok "Deploy complete!"
|
||||
5
homeai-esp32/esphome/.gitignore
vendored
Normal file
5
homeai-esp32/esphome/.gitignore
vendored
Normal file
@@ -0,0 +1,5 @@
|
||||
# Gitignore settings for ESPHome
|
||||
# This is an example and may include too much for your use-case.
|
||||
# You can modify this file to suit your needs.
|
||||
/.esphome/
|
||||
/secrets.yaml
|
||||
865
homeai-esp32/esphome/homeai-living-room.yaml
Normal file
865
homeai-esp32/esphome/homeai-living-room.yaml
Normal file
@@ -0,0 +1,865 @@
|
||||
---
|
||||
# HomeAI Living Room Satellite — ESP32-S3-BOX-3
|
||||
# Based on official ESPHome voice assistant config
|
||||
# https://github.com/esphome/wake-word-voice-assistants
|
||||
|
||||
substitutions:
|
||||
name: homeai-living-room
|
||||
friendly_name: HomeAI Living Room
|
||||
|
||||
# Face illustrations — compiled into firmware (320x240 PNG)
|
||||
loading_illustration_file: illustrations/loading.png
|
||||
idle_illustration_file: illustrations/idle.png
|
||||
listening_illustration_file: illustrations/listening.png
|
||||
thinking_illustration_file: illustrations/thinking.png
|
||||
replying_illustration_file: illustrations/replying.png
|
||||
error_illustration_file: illustrations/error.png
|
||||
timer_finished_illustration_file: illustrations/timer_finished.png
|
||||
|
||||
# Dark background for all states (matches HomeAI dashboard theme)
|
||||
loading_illustration_background_color: "000000"
|
||||
idle_illustration_background_color: "000000"
|
||||
listening_illustration_background_color: "000000"
|
||||
thinking_illustration_background_color: "000000"
|
||||
replying_illustration_background_color: "000000"
|
||||
error_illustration_background_color: "000000"
|
||||
|
||||
voice_assist_idle_phase_id: "1"
|
||||
voice_assist_listening_phase_id: "2"
|
||||
voice_assist_thinking_phase_id: "3"
|
||||
voice_assist_replying_phase_id: "4"
|
||||
voice_assist_not_ready_phase_id: "10"
|
||||
voice_assist_error_phase_id: "11"
|
||||
voice_assist_muted_phase_id: "12"
|
||||
voice_assist_timer_finished_phase_id: "20"
|
||||
|
||||
font_glyphsets: "GF_Latin_Core"
|
||||
font_family: Figtree
|
||||
|
||||
esphome:
|
||||
name: ${name}
|
||||
friendly_name: ${friendly_name}
|
||||
min_version: 2025.5.0
|
||||
name_add_mac_suffix: false
|
||||
on_boot:
|
||||
priority: 600
|
||||
then:
|
||||
- script.execute: draw_display
|
||||
- delay: 30s
|
||||
- if:
|
||||
condition:
|
||||
lambda: return id(init_in_progress);
|
||||
then:
|
||||
- lambda: id(init_in_progress) = false;
|
||||
- script.execute: draw_display
|
||||
|
||||
esp32:
|
||||
board: esp32s3box
|
||||
flash_size: 16MB
|
||||
cpu_frequency: 240MHz
|
||||
framework:
|
||||
type: esp-idf
|
||||
sdkconfig_options:
|
||||
CONFIG_ESP32S3_DEFAULT_CPU_FREQ_240: "y"
|
||||
CONFIG_ESP32S3_DATA_CACHE_64KB: "y"
|
||||
CONFIG_ESP32S3_DATA_CACHE_LINE_64B: "y"
|
||||
|
||||
psram:
|
||||
mode: octal
|
||||
speed: 80MHz
|
||||
|
||||
wifi:
|
||||
ssid: !secret wifi_ssid
|
||||
password: !secret wifi_password
|
||||
ap:
|
||||
ssid: "HomeAI Fallback"
|
||||
on_connect:
|
||||
- script.execute: draw_display
|
||||
on_disconnect:
|
||||
- script.execute: draw_display
|
||||
|
||||
captive_portal:
|
||||
|
||||
api:
|
||||
encryption:
|
||||
key: !secret api_key
|
||||
# Prevent device from rebooting if HA connection drops temporarily
|
||||
reboot_timeout: 0s
|
||||
on_client_connected:
|
||||
- script.execute: draw_display
|
||||
on_client_disconnected:
|
||||
# Debounce: wait 5s before showing "HA not found" to avoid flicker on brief drops
|
||||
- delay: 5s
|
||||
- if:
|
||||
condition:
|
||||
not:
|
||||
api.connected:
|
||||
then:
|
||||
- script.execute: draw_display
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
id: ota_esphome
|
||||
|
||||
logger:
|
||||
hardware_uart: USB_SERIAL_JTAG
|
||||
|
||||
button:
|
||||
- platform: factory_reset
|
||||
id: factory_reset_btn
|
||||
internal: true
|
||||
|
||||
binary_sensor:
|
||||
- platform: gpio
|
||||
pin:
|
||||
number: GPIO0
|
||||
ignore_strapping_warning: true
|
||||
mode: INPUT_PULLUP
|
||||
inverted: true
|
||||
id: left_top_button
|
||||
internal: true
|
||||
on_multi_click:
|
||||
# Short press: dismiss timer / toggle mute
|
||||
- timing:
|
||||
- ON for at least 50ms
|
||||
- OFF for at least 50ms
|
||||
then:
|
||||
- if:
|
||||
condition:
|
||||
switch.is_on: timer_ringing
|
||||
then:
|
||||
- switch.turn_off: timer_ringing
|
||||
else:
|
||||
- switch.toggle: mute
|
||||
# Long press (10s): factory reset
|
||||
- timing:
|
||||
- ON for at least 10s
|
||||
then:
|
||||
- button.press: factory_reset_btn
|
||||
|
||||
# --- Display backlight ---
|
||||
|
||||
output:
|
||||
- platform: ledc
|
||||
pin: GPIO47
|
||||
id: backlight_output
|
||||
|
||||
light:
|
||||
- platform: monochromatic
|
||||
id: led
|
||||
name: Screen
|
||||
icon: "mdi:television"
|
||||
entity_category: config
|
||||
output: backlight_output
|
||||
restore_mode: RESTORE_DEFAULT_ON
|
||||
default_transition_length: 250ms
|
||||
|
||||
# --- Audio hardware ---
|
||||
|
||||
i2c:
|
||||
scl: GPIO18
|
||||
sda: GPIO8
|
||||
|
||||
i2s_audio:
|
||||
- id: i2s_audio_bus
|
||||
i2s_lrclk_pin:
|
||||
number: GPIO45
|
||||
ignore_strapping_warning: true
|
||||
i2s_bclk_pin: GPIO17
|
||||
i2s_mclk_pin: GPIO2
|
||||
|
||||
audio_adc:
|
||||
- platform: es7210
|
||||
id: es7210_adc
|
||||
bits_per_sample: 16bit
|
||||
sample_rate: 16000
|
||||
|
||||
audio_dac:
|
||||
- platform: es8311
|
||||
id: es8311_dac
|
||||
bits_per_sample: 16bit
|
||||
sample_rate: 48000
|
||||
|
||||
microphone:
|
||||
- platform: i2s_audio
|
||||
id: box_mic
|
||||
sample_rate: 16000
|
||||
i2s_din_pin: GPIO16
|
||||
bits_per_sample: 16bit
|
||||
adc_type: external
|
||||
|
||||
speaker:
|
||||
- platform: i2s_audio
|
||||
id: box_speaker
|
||||
i2s_dout_pin: GPIO15
|
||||
dac_type: external
|
||||
sample_rate: 48000
|
||||
bits_per_sample: 16bit
|
||||
channel: left
|
||||
audio_dac: es8311_dac
|
||||
buffer_duration: 100ms
|
||||
|
||||
media_player:
|
||||
- platform: speaker
|
||||
name: None
|
||||
id: speaker_media_player
|
||||
volume_min: 0.5
|
||||
volume_max: 0.85
|
||||
announcement_pipeline:
|
||||
speaker: box_speaker
|
||||
format: FLAC
|
||||
sample_rate: 48000
|
||||
num_channels: 1
|
||||
files:
|
||||
- id: timer_finished_sound
|
||||
file: https://github.com/esphome/home-assistant-voice-pe/raw/dev/sounds/timer_finished.flac
|
||||
on_announcement:
|
||||
- if:
|
||||
condition:
|
||||
- microphone.is_capturing:
|
||||
then:
|
||||
- script.execute: stop_wake_word
|
||||
- if:
|
||||
condition:
|
||||
- lambda: return id(wake_word_engine_location).current_option() == "In Home Assistant";
|
||||
then:
|
||||
- wait_until:
|
||||
- not:
|
||||
voice_assistant.is_running:
|
||||
- if:
|
||||
condition:
|
||||
not:
|
||||
voice_assistant.is_running:
|
||||
then:
|
||||
- lambda: id(voice_assistant_phase) = ${voice_assist_muted_phase_id};
|
||||
- script.execute: draw_display
|
||||
on_idle:
|
||||
- if:
|
||||
condition:
|
||||
not:
|
||||
voice_assistant.is_running:
|
||||
then:
|
||||
- script.execute: start_wake_word
|
||||
- script.execute: set_idle_or_mute_phase
|
||||
- script.execute: draw_display
|
||||
|
||||
# --- Wake word (on-device) ---
|
||||
|
||||
micro_wake_word:
|
||||
id: mww
|
||||
models:
|
||||
- hey_jarvis
|
||||
on_wake_word_detected:
|
||||
- voice_assistant.start:
|
||||
wake_word: !lambda return wake_word;
|
||||
|
||||
# --- Voice assistant ---
|
||||
|
||||
voice_assistant:
|
||||
id: va
|
||||
microphone: box_mic
|
||||
media_player: speaker_media_player
|
||||
micro_wake_word: mww
|
||||
noise_suppression_level: 2
|
||||
auto_gain: 31dBFS
|
||||
volume_multiplier: 2.0
|
||||
on_listening:
|
||||
- lambda: id(voice_assistant_phase) = ${voice_assist_listening_phase_id};
|
||||
- text_sensor.template.publish:
|
||||
id: text_request
|
||||
state: "..."
|
||||
- text_sensor.template.publish:
|
||||
id: text_response
|
||||
state: "..."
|
||||
- script.execute: draw_display
|
||||
on_stt_vad_end:
|
||||
- lambda: id(voice_assistant_phase) = ${voice_assist_thinking_phase_id};
|
||||
- script.execute: draw_display
|
||||
on_stt_end:
|
||||
- text_sensor.template.publish:
|
||||
id: text_request
|
||||
state: !lambda return x;
|
||||
- script.execute: draw_display
|
||||
on_tts_start:
|
||||
- text_sensor.template.publish:
|
||||
id: text_response
|
||||
state: !lambda return x;
|
||||
- lambda: id(voice_assistant_phase) = ${voice_assist_replying_phase_id};
|
||||
- script.execute: draw_display
|
||||
on_end:
|
||||
- wait_until:
|
||||
condition:
|
||||
- media_player.is_announcing:
|
||||
timeout: 0.5s
|
||||
- wait_until:
|
||||
- and:
|
||||
- not:
|
||||
media_player.is_announcing:
|
||||
- not:
|
||||
speaker.is_playing:
|
||||
- if:
|
||||
condition:
|
||||
- lambda: return id(wake_word_engine_location).current_option() == "On device";
|
||||
then:
|
||||
- lambda: id(va).set_use_wake_word(false);
|
||||
- micro_wake_word.start:
|
||||
- script.execute: set_idle_or_mute_phase
|
||||
- script.execute: draw_display
|
||||
- text_sensor.template.publish:
|
||||
id: text_request
|
||||
state: ""
|
||||
- text_sensor.template.publish:
|
||||
id: text_response
|
||||
state: ""
|
||||
on_error:
|
||||
- if:
|
||||
condition:
|
||||
lambda: return !id(init_in_progress);
|
||||
then:
|
||||
- lambda: id(voice_assistant_phase) = ${voice_assist_error_phase_id};
|
||||
- script.execute: draw_display
|
||||
- delay: 1s
|
||||
- if:
|
||||
condition:
|
||||
switch.is_off: mute
|
||||
then:
|
||||
- lambda: id(voice_assistant_phase) = ${voice_assist_idle_phase_id};
|
||||
else:
|
||||
- lambda: id(voice_assistant_phase) = ${voice_assist_muted_phase_id};
|
||||
- script.execute: draw_display
|
||||
on_client_connected:
|
||||
- lambda: id(init_in_progress) = false;
|
||||
- script.execute: start_wake_word
|
||||
- script.execute: set_idle_or_mute_phase
|
||||
- script.execute: draw_display
|
||||
on_client_disconnected:
|
||||
- script.execute: stop_wake_word
|
||||
- lambda: id(voice_assistant_phase) = ${voice_assist_not_ready_phase_id};
|
||||
- script.execute: draw_display
|
||||
on_timer_started:
|
||||
- script.execute: draw_display
|
||||
on_timer_cancelled:
|
||||
- script.execute: draw_display
|
||||
on_timer_updated:
|
||||
- script.execute: draw_display
|
||||
on_timer_tick:
|
||||
- script.execute: draw_display
|
||||
on_timer_finished:
|
||||
- switch.turn_on: timer_ringing
|
||||
- wait_until:
|
||||
media_player.is_announcing:
|
||||
- lambda: id(voice_assistant_phase) = ${voice_assist_timer_finished_phase_id};
|
||||
- script.execute: draw_display
|
||||
|
||||
# --- Scripts ---
|
||||
|
||||
script:
|
||||
- id: draw_display
|
||||
then:
|
||||
- if:
|
||||
condition:
|
||||
lambda: return !id(init_in_progress);
|
||||
then:
|
||||
- if:
|
||||
condition:
|
||||
wifi.connected:
|
||||
then:
|
||||
- if:
|
||||
condition:
|
||||
api.connected:
|
||||
then:
|
||||
- lambda: |
|
||||
switch(id(voice_assistant_phase)) {
|
||||
case ${voice_assist_listening_phase_id}:
|
||||
id(s3_box_lcd).show_page(listening_page);
|
||||
id(s3_box_lcd).update();
|
||||
break;
|
||||
case ${voice_assist_thinking_phase_id}:
|
||||
id(s3_box_lcd).show_page(thinking_page);
|
||||
id(s3_box_lcd).update();
|
||||
break;
|
||||
case ${voice_assist_replying_phase_id}:
|
||||
id(s3_box_lcd).show_page(replying_page);
|
||||
id(s3_box_lcd).update();
|
||||
break;
|
||||
case ${voice_assist_error_phase_id}:
|
||||
id(s3_box_lcd).show_page(error_page);
|
||||
id(s3_box_lcd).update();
|
||||
break;
|
||||
case ${voice_assist_muted_phase_id}:
|
||||
id(s3_box_lcd).show_page(muted_page);
|
||||
id(s3_box_lcd).update();
|
||||
break;
|
||||
case ${voice_assist_not_ready_phase_id}:
|
||||
id(s3_box_lcd).show_page(no_ha_page);
|
||||
id(s3_box_lcd).update();
|
||||
break;
|
||||
case ${voice_assist_timer_finished_phase_id}:
|
||||
id(s3_box_lcd).show_page(timer_finished_page);
|
||||
id(s3_box_lcd).update();
|
||||
break;
|
||||
default:
|
||||
id(s3_box_lcd).show_page(idle_page);
|
||||
id(s3_box_lcd).update();
|
||||
}
|
||||
else:
|
||||
- display.page.show: no_ha_page
|
||||
- component.update: s3_box_lcd
|
||||
else:
|
||||
- display.page.show: no_wifi_page
|
||||
- component.update: s3_box_lcd
|
||||
else:
|
||||
- display.page.show: initializing_page
|
||||
- component.update: s3_box_lcd
|
||||
|
||||
- id: fetch_first_active_timer
|
||||
then:
|
||||
- lambda: |
|
||||
const auto &timers = id(va).get_timers();
|
||||
auto output_timer = timers.begin()->second;
|
||||
for (const auto &timer : timers) {
|
||||
if (timer.second.is_active && timer.second.seconds_left <= output_timer.seconds_left) {
|
||||
output_timer = timer.second;
|
||||
}
|
||||
}
|
||||
id(global_first_active_timer) = output_timer;
|
||||
|
||||
- id: check_if_timers_active
|
||||
then:
|
||||
- lambda: |
|
||||
const auto &timers = id(va).get_timers();
|
||||
bool output = false;
|
||||
for (const auto &timer : timers) {
|
||||
if (timer.second.is_active) { output = true; }
|
||||
}
|
||||
id(global_is_timer_active) = output;
|
||||
|
||||
- id: fetch_first_timer
|
||||
then:
|
||||
- lambda: |
|
||||
const auto &timers = id(va).get_timers();
|
||||
auto output_timer = timers.begin()->second;
|
||||
for (const auto &timer : timers) {
|
||||
if (timer.second.seconds_left <= output_timer.seconds_left) {
|
||||
output_timer = timer.second;
|
||||
}
|
||||
}
|
||||
id(global_first_timer) = output_timer;
|
||||
|
||||
- id: check_if_timers
|
||||
then:
|
||||
- lambda: |
|
||||
const auto &timers = id(va).get_timers();
|
||||
bool output = false;
|
||||
for (const auto &timer : timers) {
|
||||
if (timer.second.is_active) { output = true; }
|
||||
}
|
||||
id(global_is_timer) = output;
|
||||
|
||||
- id: draw_timer_timeline
|
||||
then:
|
||||
- lambda: |
|
||||
id(check_if_timers_active).execute();
|
||||
id(check_if_timers).execute();
|
||||
if (id(global_is_timer_active)){
|
||||
id(fetch_first_active_timer).execute();
|
||||
int active_pixels = round( 320 * id(global_first_active_timer).seconds_left / max(id(global_first_active_timer).total_seconds, static_cast<uint32_t>(1)) );
|
||||
if (active_pixels > 0){
|
||||
id(s3_box_lcd).filled_rectangle(0, 225, 320, 15, Color::WHITE);
|
||||
id(s3_box_lcd).filled_rectangle(0, 226, active_pixels, 13, id(active_timer_color));
|
||||
}
|
||||
} else if (id(global_is_timer)){
|
||||
id(fetch_first_timer).execute();
|
||||
int active_pixels = round( 320 * id(global_first_timer).seconds_left / max(id(global_first_timer).total_seconds, static_cast<uint32_t>(1)));
|
||||
if (active_pixels > 0){
|
||||
id(s3_box_lcd).filled_rectangle(0, 225, 320, 15, Color::WHITE);
|
||||
id(s3_box_lcd).filled_rectangle(0, 226, active_pixels, 13, id(paused_timer_color));
|
||||
}
|
||||
}
|
||||
|
||||
- id: draw_active_timer_widget
|
||||
then:
|
||||
- lambda: |
|
||||
id(check_if_timers_active).execute();
|
||||
if (id(global_is_timer_active)){
|
||||
id(s3_box_lcd).filled_rectangle(80, 40, 160, 50, Color::WHITE);
|
||||
id(s3_box_lcd).rectangle(80, 40, 160, 50, Color::BLACK);
|
||||
id(fetch_first_active_timer).execute();
|
||||
int hours_left = floor(id(global_first_active_timer).seconds_left / 3600);
|
||||
int minutes_left = floor((id(global_first_active_timer).seconds_left - hours_left * 3600) / 60);
|
||||
int seconds_left = id(global_first_active_timer).seconds_left - hours_left * 3600 - minutes_left * 60;
|
||||
auto display_hours = (hours_left < 10 ? "0" : "") + std::to_string(hours_left);
|
||||
auto display_minute = (minutes_left < 10 ? "0" : "") + std::to_string(minutes_left);
|
||||
auto display_seconds = (seconds_left < 10 ? "0" : "") + std::to_string(seconds_left);
|
||||
std::string display_string = "";
|
||||
if (hours_left > 0) {
|
||||
display_string = display_hours + ":" + display_minute;
|
||||
} else {
|
||||
display_string = display_minute + ":" + display_seconds;
|
||||
}
|
||||
id(s3_box_lcd).printf(120, 47, id(font_timer), Color::BLACK, "%s", display_string.c_str());
|
||||
}
|
||||
|
||||
- id: start_wake_word
|
||||
then:
|
||||
- if:
|
||||
condition:
|
||||
and:
|
||||
- not:
|
||||
- voice_assistant.is_running:
|
||||
- lambda: return id(wake_word_engine_location).current_option() == "On device";
|
||||
then:
|
||||
- lambda: id(va).set_use_wake_word(false);
|
||||
- micro_wake_word.start:
|
||||
- if:
|
||||
condition:
|
||||
and:
|
||||
- not:
|
||||
- voice_assistant.is_running:
|
||||
- lambda: return id(wake_word_engine_location).current_option() == "In Home Assistant";
|
||||
then:
|
||||
- lambda: id(va).set_use_wake_word(true);
|
||||
- voice_assistant.start_continuous:
|
||||
|
||||
- id: stop_wake_word
|
||||
then:
|
||||
- if:
|
||||
condition:
|
||||
lambda: return id(wake_word_engine_location).current_option() == "In Home Assistant";
|
||||
then:
|
||||
- lambda: id(va).set_use_wake_word(false);
|
||||
- voice_assistant.stop:
|
||||
- if:
|
||||
condition:
|
||||
lambda: return id(wake_word_engine_location).current_option() == "On device";
|
||||
then:
|
||||
- micro_wake_word.stop:
|
||||
|
||||
- id: set_idle_or_mute_phase
|
||||
then:
|
||||
- if:
|
||||
condition:
|
||||
switch.is_off: mute
|
||||
then:
|
||||
- lambda: id(voice_assistant_phase) = ${voice_assist_idle_phase_id};
|
||||
else:
|
||||
- lambda: id(voice_assistant_phase) = ${voice_assist_muted_phase_id};
|
||||
|
||||
# --- Switches ---
|
||||
|
||||
switch:
|
||||
- platform: gpio
|
||||
name: Speaker Enable
|
||||
pin:
|
||||
number: GPIO46
|
||||
ignore_strapping_warning: true
|
||||
restore_mode: RESTORE_DEFAULT_ON
|
||||
entity_category: config
|
||||
disabled_by_default: true
|
||||
- platform: template
|
||||
name: Mute
|
||||
id: mute
|
||||
icon: "mdi:microphone-off"
|
||||
optimistic: true
|
||||
restore_mode: RESTORE_DEFAULT_OFF
|
||||
entity_category: config
|
||||
on_turn_off:
|
||||
- microphone.unmute:
|
||||
- lambda: id(voice_assistant_phase) = ${voice_assist_idle_phase_id};
|
||||
- script.execute: draw_display
|
||||
on_turn_on:
|
||||
- microphone.mute:
|
||||
- lambda: id(voice_assistant_phase) = ${voice_assist_muted_phase_id};
|
||||
- script.execute: draw_display
|
||||
- platform: template
|
||||
id: timer_ringing
|
||||
optimistic: true
|
||||
internal: true
|
||||
restore_mode: ALWAYS_OFF
|
||||
on_turn_off:
|
||||
- lambda: |-
|
||||
id(speaker_media_player)
|
||||
->make_call()
|
||||
.set_command(media_player::MediaPlayerCommand::MEDIA_PLAYER_COMMAND_REPEAT_OFF)
|
||||
.set_announcement(true)
|
||||
.perform();
|
||||
id(speaker_media_player)->set_playlist_delay_ms(speaker::AudioPipelineType::ANNOUNCEMENT, 0);
|
||||
- media_player.stop:
|
||||
announcement: true
|
||||
on_turn_on:
|
||||
- lambda: |-
|
||||
id(speaker_media_player)
|
||||
->make_call()
|
||||
.set_command(media_player::MediaPlayerCommand::MEDIA_PLAYER_COMMAND_REPEAT_ONE)
|
||||
.set_announcement(true)
|
||||
.perform();
|
||||
id(speaker_media_player)->set_playlist_delay_ms(speaker::AudioPipelineType::ANNOUNCEMENT, 1000);
|
||||
- media_player.speaker.play_on_device_media_file:
|
||||
media_file: timer_finished_sound
|
||||
announcement: true
|
||||
- delay: 15min
|
||||
- switch.turn_off: timer_ringing
|
||||
|
||||
# --- Wake word engine location selector ---
|
||||
|
||||
select:
|
||||
- platform: template
|
||||
entity_category: config
|
||||
name: Wake word engine location
|
||||
id: wake_word_engine_location
|
||||
icon: "mdi:account-voice"
|
||||
optimistic: true
|
||||
restore_value: true
|
||||
options:
|
||||
- In Home Assistant
|
||||
- On device
|
||||
initial_option: On device
|
||||
on_value:
|
||||
- if:
|
||||
condition:
|
||||
lambda: return !id(init_in_progress);
|
||||
then:
|
||||
- wait_until:
|
||||
lambda: return id(voice_assistant_phase) == ${voice_assist_muted_phase_id} || id(voice_assistant_phase) == ${voice_assist_idle_phase_id};
|
||||
- if:
|
||||
condition:
|
||||
lambda: return x == "In Home Assistant";
|
||||
then:
|
||||
- micro_wake_word.stop
|
||||
- delay: 500ms
|
||||
- if:
|
||||
condition:
|
||||
switch.is_off: mute
|
||||
then:
|
||||
- lambda: id(va).set_use_wake_word(true);
|
||||
- voice_assistant.start_continuous:
|
||||
- if:
|
||||
condition:
|
||||
lambda: return x == "On device";
|
||||
then:
|
||||
- lambda: id(va).set_use_wake_word(false);
|
||||
- voice_assistant.stop
|
||||
- delay: 500ms
|
||||
- if:
|
||||
condition:
|
||||
switch.is_off: mute
|
||||
then:
|
||||
- micro_wake_word.start
|
||||
|
||||
# --- Global variables ---
|
||||
|
||||
globals:
|
||||
- id: init_in_progress
|
||||
type: bool
|
||||
restore_value: false
|
||||
initial_value: "true"
|
||||
- id: voice_assistant_phase
|
||||
type: int
|
||||
restore_value: false
|
||||
initial_value: ${voice_assist_not_ready_phase_id}
|
||||
- id: global_first_active_timer
|
||||
type: voice_assistant::Timer
|
||||
restore_value: false
|
||||
- id: global_is_timer_active
|
||||
type: bool
|
||||
restore_value: false
|
||||
- id: global_first_timer
|
||||
type: voice_assistant::Timer
|
||||
restore_value: false
|
||||
- id: global_is_timer
|
||||
type: bool
|
||||
restore_value: false
|
||||
|
||||
# --- Display images ---
|
||||
|
||||
image:
|
||||
- file: ${error_illustration_file}
|
||||
id: casita_error
|
||||
resize: 320x240
|
||||
type: RGB
|
||||
transparency: alpha_channel
|
||||
- file: ${idle_illustration_file}
|
||||
id: casita_idle
|
||||
resize: 320x240
|
||||
type: RGB
|
||||
transparency: alpha_channel
|
||||
- file: ${listening_illustration_file}
|
||||
id: casita_listening
|
||||
resize: 320x240
|
||||
type: RGB
|
||||
transparency: alpha_channel
|
||||
- file: ${thinking_illustration_file}
|
||||
id: casita_thinking
|
||||
resize: 320x240
|
||||
type: RGB
|
||||
transparency: alpha_channel
|
||||
- file: ${replying_illustration_file}
|
||||
id: casita_replying
|
||||
resize: 320x240
|
||||
type: RGB
|
||||
transparency: alpha_channel
|
||||
- file: ${timer_finished_illustration_file}
|
||||
id: casita_timer_finished
|
||||
resize: 320x240
|
||||
type: RGB
|
||||
transparency: alpha_channel
|
||||
- file: ${loading_illustration_file}
|
||||
id: casita_initializing
|
||||
resize: 320x240
|
||||
type: RGB
|
||||
transparency: alpha_channel
|
||||
- file: https://github.com/esphome/wake-word-voice-assistants/raw/main/error_box_illustrations/error-no-wifi.png
|
||||
id: error_no_wifi
|
||||
resize: 320x240
|
||||
type: RGB
|
||||
transparency: alpha_channel
|
||||
- file: https://github.com/esphome/wake-word-voice-assistants/raw/main/error_box_illustrations/error-no-ha.png
|
||||
id: error_no_ha
|
||||
resize: 320x240
|
||||
type: RGB
|
||||
transparency: alpha_channel
|
||||
|
||||
# --- Fonts ---
|
||||
|
||||
font:
|
||||
- file:
|
||||
type: gfonts
|
||||
family: ${font_family}
|
||||
weight: 300
|
||||
italic: true
|
||||
id: font_request
|
||||
size: 15
|
||||
glyphsets:
|
||||
- ${font_glyphsets}
|
||||
- file:
|
||||
type: gfonts
|
||||
family: ${font_family}
|
||||
weight: 300
|
||||
id: font_response
|
||||
size: 15
|
||||
glyphsets:
|
||||
- ${font_glyphsets}
|
||||
- file:
|
||||
type: gfonts
|
||||
family: ${font_family}
|
||||
weight: 300
|
||||
id: font_timer
|
||||
size: 30
|
||||
glyphsets:
|
||||
- ${font_glyphsets}
|
||||
|
||||
# --- Text sensors (request/response display) ---
|
||||
|
||||
text_sensor:
|
||||
- id: text_request
|
||||
platform: template
|
||||
on_value:
|
||||
lambda: |-
|
||||
if(id(text_request).state.length()>32) {
|
||||
std::string name = id(text_request).state.c_str();
|
||||
std::string truncated = esphome::str_truncate(name.c_str(),31);
|
||||
id(text_request).state = (truncated+"...").c_str();
|
||||
}
|
||||
- id: text_response
|
||||
platform: template
|
||||
on_value:
|
||||
lambda: |-
|
||||
if(id(text_response).state.length()>32) {
|
||||
std::string name = id(text_response).state.c_str();
|
||||
std::string truncated = esphome::str_truncate(name.c_str(),31);
|
||||
id(text_response).state = (truncated+"...").c_str();
|
||||
}
|
||||
|
||||
# --- Colors ---
|
||||
|
||||
color:
|
||||
- id: idle_color
|
||||
hex: ${idle_illustration_background_color}
|
||||
- id: listening_color
|
||||
hex: ${listening_illustration_background_color}
|
||||
- id: thinking_color
|
||||
hex: ${thinking_illustration_background_color}
|
||||
- id: replying_color
|
||||
hex: ${replying_illustration_background_color}
|
||||
- id: loading_color
|
||||
hex: ${loading_illustration_background_color}
|
||||
- id: error_color
|
||||
hex: ${error_illustration_background_color}
|
||||
- id: active_timer_color
|
||||
hex: "26ed3a"
|
||||
- id: paused_timer_color
|
||||
hex: "3b89e3"
|
||||
|
||||
# --- SPI + Display ---
|
||||
|
||||
spi:
|
||||
- id: spi_bus
|
||||
clk_pin: 7
|
||||
mosi_pin: 6
|
||||
|
||||
display:
|
||||
- platform: ili9xxx
|
||||
id: s3_box_lcd
|
||||
model: S3BOX
|
||||
invert_colors: false
|
||||
data_rate: 40MHz
|
||||
cs_pin: 5
|
||||
dc_pin: 4
|
||||
reset_pin:
|
||||
number: 48
|
||||
inverted: true
|
||||
update_interval: never
|
||||
pages:
|
||||
- id: idle_page
|
||||
lambda: |-
|
||||
it.fill(id(idle_color));
|
||||
it.image((it.get_width() / 2), (it.get_height() / 2), id(casita_idle), ImageAlign::CENTER);
|
||||
id(draw_timer_timeline).execute();
|
||||
id(draw_active_timer_widget).execute();
|
||||
- id: listening_page
|
||||
lambda: |-
|
||||
it.fill(id(listening_color));
|
||||
it.image((it.get_width() / 2), (it.get_height() / 2), id(casita_listening), ImageAlign::CENTER);
|
||||
id(draw_timer_timeline).execute();
|
||||
- id: thinking_page
|
||||
lambda: |-
|
||||
it.fill(id(thinking_color));
|
||||
it.image((it.get_width() / 2), (it.get_height() / 2), id(casita_thinking), ImageAlign::CENTER);
|
||||
it.filled_rectangle(20, 20, 280, 30, Color::WHITE);
|
||||
it.rectangle(20, 20, 280, 30, Color::BLACK);
|
||||
it.printf(30, 25, id(font_request), Color::BLACK, "%s", id(text_request).state.c_str());
|
||||
id(draw_timer_timeline).execute();
|
||||
- id: replying_page
|
||||
lambda: |-
|
||||
it.fill(id(replying_color));
|
||||
it.image((it.get_width() / 2), (it.get_height() / 2), id(casita_replying), ImageAlign::CENTER);
|
||||
it.filled_rectangle(20, 20, 280, 30, Color::WHITE);
|
||||
it.rectangle(20, 20, 280, 30, Color::BLACK);
|
||||
it.filled_rectangle(20, 190, 280, 30, Color::WHITE);
|
||||
it.rectangle(20, 190, 280, 30, Color::BLACK);
|
||||
it.printf(30, 25, id(font_request), Color::BLACK, "%s", id(text_request).state.c_str());
|
||||
it.printf(30, 195, id(font_response), Color::BLACK, "%s", id(text_response).state.c_str());
|
||||
id(draw_timer_timeline).execute();
|
||||
- id: timer_finished_page
|
||||
lambda: |-
|
||||
it.fill(id(idle_color));
|
||||
it.image((it.get_width() / 2), (it.get_height() / 2), id(casita_timer_finished), ImageAlign::CENTER);
|
||||
- id: error_page
|
||||
lambda: |-
|
||||
it.fill(id(error_color));
|
||||
it.image((it.get_width() / 2), (it.get_height() / 2), id(casita_error), ImageAlign::CENTER);
|
||||
- id: no_ha_page
|
||||
lambda: |-
|
||||
it.image((it.get_width() / 2), (it.get_height() / 2), id(error_no_ha), ImageAlign::CENTER);
|
||||
- id: no_wifi_page
|
||||
lambda: |-
|
||||
it.image((it.get_width() / 2), (it.get_height() / 2), id(error_no_wifi), ImageAlign::CENTER);
|
||||
- id: initializing_page
|
||||
lambda: |-
|
||||
it.fill(id(loading_color));
|
||||
it.image((it.get_width() / 2), (it.get_height() / 2), id(casita_initializing), ImageAlign::CENTER);
|
||||
- id: muted_page
|
||||
lambda: |-
|
||||
it.fill(Color::BLACK);
|
||||
id(draw_timer_timeline).execute();
|
||||
id(draw_active_timer_widget).execute();
|
||||
BIN
homeai-esp32/esphome/illustrations/error.png
Normal file
BIN
homeai-esp32/esphome/illustrations/error.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 76 KiB |
BIN
homeai-esp32/esphome/illustrations/idle.png
Normal file
BIN
homeai-esp32/esphome/illustrations/idle.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 90 KiB |
BIN
homeai-esp32/esphome/illustrations/listening.png
Normal file
BIN
homeai-esp32/esphome/illustrations/listening.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 89 KiB |
BIN
homeai-esp32/esphome/illustrations/loading.png
Normal file
BIN
homeai-esp32/esphome/illustrations/loading.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 91 KiB |
BIN
homeai-esp32/esphome/illustrations/replying.png
Normal file
BIN
homeai-esp32/esphome/illustrations/replying.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 85 KiB |
BIN
homeai-esp32/esphome/illustrations/thinking.png
Normal file
BIN
homeai-esp32/esphome/illustrations/thinking.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 89 KiB |
BIN
homeai-esp32/esphome/illustrations/timer_finished.png
Normal file
BIN
homeai-esp32/esphome/illustrations/timer_finished.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 88 KiB |
@@ -1,76 +1,177 @@
|
||||
#!/usr/bin/env bash
|
||||
# homeai-esp32/setup.sh — P6: ESPHome firmware for ESP32-S3-BOX-3
|
||||
#
|
||||
# Components:
|
||||
# - ESPHome — firmware build + flash tool
|
||||
# - base.yaml — shared device config
|
||||
# - voice.yaml — Wyoming Satellite + microWakeWord
|
||||
# - display.yaml — LVGL animated face
|
||||
# - Per-room configs — s3-box-living-room.yaml, etc.
|
||||
# Usage:
|
||||
# ./setup.sh — check environment + validate config
|
||||
# ./setup.sh flash — compile + flash via USB (first time)
|
||||
# ./setup.sh ota — compile + flash via OTA (wireless)
|
||||
# ./setup.sh logs — stream device logs
|
||||
# ./setup.sh validate — validate YAML without compiling
|
||||
#
|
||||
# Prerequisites:
|
||||
# - P1 (homeai-infra) — Home Assistant running
|
||||
# - P3 (homeai-voice) — Wyoming STT/TTS running (ports 10300/10301)
|
||||
# - Python 3.10+
|
||||
# - USB-C cable for first flash (subsequent updates via OTA)
|
||||
# - On Linux: ensure user is in the dialout group for USB access
|
||||
# - ~/homeai-esphome-env — Python 3.12 venv with ESPHome
|
||||
# - Home Assistant running on 10.0.0.199
|
||||
# - Wyoming STT/TTS running on Mac Mini (ports 10300/10301)
|
||||
|
||||
set -euo pipefail
|
||||
|
||||
SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
|
||||
REPO_DIR="$(cd "${SCRIPT_DIR}/.." && pwd)"
|
||||
source "${REPO_DIR}/scripts/common.sh"
|
||||
ESPHOME_VENV="${HOME}/homeai-esphome-env"
|
||||
ESPHOME="${ESPHOME_VENV}/bin/esphome"
|
||||
ESPHOME_DIR="${SCRIPT_DIR}/esphome"
|
||||
DEFAULT_CONFIG="${ESPHOME_DIR}/homeai-living-room.yaml"
|
||||
|
||||
log_section "P6: ESP32 Firmware (ESPHome)"
|
||||
detect_platform
|
||||
# Colors
|
||||
RED='\033[0;31m'
|
||||
GREEN='\033[0;32m'
|
||||
YELLOW='\033[1;33m'
|
||||
BLUE='\033[0;34m'
|
||||
NC='\033[0m'
|
||||
|
||||
# ─── Prerequisite check ────────────────────────────────────────────────────────
|
||||
log_info "Checking prerequisites..."
|
||||
log_info() { echo -e "${BLUE}[INFO]${NC} $*"; }
|
||||
log_ok() { echo -e "${GREEN}[OK]${NC} $*"; }
|
||||
log_warn() { echo -e "${YELLOW}[WARN]${NC} $*"; }
|
||||
log_error() { echo -e "${RED}[ERROR]${NC} $*"; }
|
||||
|
||||
if ! command_exists python3; then
|
||||
log_warn "python3 not found — required for ESPHome"
|
||||
fi
|
||||
# ─── Environment checks ──────────────────────────────────────────────────────
|
||||
|
||||
if ! command_exists esphome; then
|
||||
log_info "ESPHome not installed. To install: pip install esphome"
|
||||
fi
|
||||
check_env() {
|
||||
local ok=true
|
||||
|
||||
if [[ "$OS_TYPE" == "linux" ]]; then
|
||||
if ! groups "$USER" | grep -q dialout; then
|
||||
log_warn "User '$USER' not in 'dialout' group — USB flashing may fail."
|
||||
log_warn "Fix: sudo usermod -aG dialout $USER (then log out and back in)"
|
||||
log_info "Checking environment..."
|
||||
|
||||
# ESPHome venv
|
||||
if [[ -x "${ESPHOME}" ]]; then
|
||||
local version
|
||||
version=$("${ESPHOME}" version 2>/dev/null)
|
||||
log_ok "ESPHome: ${version}"
|
||||
else
|
||||
log_error "ESPHome not found at ${ESPHOME}"
|
||||
echo " Install: /opt/homebrew/opt/python@3.12/bin/python3.12 -m venv ${ESPHOME_VENV}"
|
||||
echo " ${ESPHOME_VENV}/bin/pip install 'esphome>=2025.5.0'"
|
||||
ok=false
|
||||
fi
|
||||
fi
|
||||
|
||||
# Check P3 dependency
|
||||
if ! curl -sf http://localhost:8123 -o /dev/null 2>/dev/null; then
|
||||
log_warn "Home Assistant (P1) not reachable — ESP32 units won't auto-discover"
|
||||
fi
|
||||
# secrets.yaml
|
||||
if [[ -f "${ESPHOME_DIR}/secrets.yaml" ]]; then
|
||||
if grep -q "YOUR_" "${ESPHOME_DIR}/secrets.yaml" 2>/dev/null; then
|
||||
log_warn "secrets.yaml contains placeholder values — edit before flashing"
|
||||
ok=false
|
||||
else
|
||||
log_ok "secrets.yaml configured"
|
||||
fi
|
||||
else
|
||||
log_error "secrets.yaml not found at ${ESPHOME_DIR}/secrets.yaml"
|
||||
ok=false
|
||||
fi
|
||||
|
||||
# ─── TODO: Implementation ──────────────────────────────────────────────────────
|
||||
cat <<'EOF'
|
||||
# Config file
|
||||
if [[ -f "${DEFAULT_CONFIG}" ]]; then
|
||||
log_ok "Config: $(basename "${DEFAULT_CONFIG}")"
|
||||
else
|
||||
log_error "Config not found: ${DEFAULT_CONFIG}"
|
||||
ok=false
|
||||
fi
|
||||
|
||||
┌─────────────────────────────────────────────────────────────────┐
|
||||
│ P6: homeai-esp32 — NOT YET IMPLEMENTED │
|
||||
│ │
|
||||
│ Implementation steps: │
|
||||
│ 1. pip install esphome │
|
||||
│ 2. Create esphome/secrets.yaml (gitignored) │
|
||||
│ 3. Create esphome/base.yaml (WiFi, API, OTA) │
|
||||
│ 4. Create esphome/voice.yaml (Wyoming Satellite, wakeword) │
|
||||
│ 5. Create esphome/display.yaml (LVGL face, 5 states) │
|
||||
│ 6. Create esphome/animations.yaml (face state scripts) │
|
||||
│ 7. Create per-room configs (s3-box-living-room.yaml, etc.) │
|
||||
│ 8. First flash via USB: esphome run esphome/<room>.yaml │
|
||||
│ 9. Subsequent OTA: esphome upload esphome/<room>.yaml │
|
||||
│ 10. Add to Home Assistant → assign Wyoming voice pipeline │
|
||||
│ │
|
||||
│ Quick flash (once esphome/ is ready): │
|
||||
│ esphome run esphome/s3-box-living-room.yaml │
|
||||
│ esphome logs esphome/s3-box-living-room.yaml │
|
||||
└─────────────────────────────────────────────────────────────────┘
|
||||
# Illustrations
|
||||
local illust_dir="${ESPHOME_DIR}/illustrations"
|
||||
local illust_count
|
||||
illust_count=$(find "${illust_dir}" -name "*.png" 2>/dev/null | wc -l | tr -d ' ')
|
||||
if [[ "${illust_count}" -ge 7 ]]; then
|
||||
log_ok "Illustrations: ${illust_count} PNGs in illustrations/"
|
||||
else
|
||||
log_warn "Missing illustrations (found ${illust_count}, need 7)"
|
||||
fi
|
||||
|
||||
EOF
|
||||
# Wyoming services on Mac Mini
|
||||
if curl -sf "http://localhost:10300" -o /dev/null 2>/dev/null || nc -z localhost 10300 2>/dev/null; then
|
||||
log_ok "Wyoming STT (port 10300) reachable"
|
||||
else
|
||||
log_warn "Wyoming STT (port 10300) not reachable"
|
||||
fi
|
||||
|
||||
log_info "P6 is not yet implemented. See homeai-esp32/PLAN.md for details."
|
||||
exit 0
|
||||
if curl -sf "http://localhost:10301" -o /dev/null 2>/dev/null || nc -z localhost 10301 2>/dev/null; then
|
||||
log_ok "Wyoming TTS (port 10301) reachable"
|
||||
else
|
||||
log_warn "Wyoming TTS (port 10301) not reachable"
|
||||
fi
|
||||
|
||||
# Home Assistant
|
||||
if curl -sk "https://10.0.0.199:8123" -o /dev/null 2>/dev/null; then
|
||||
log_ok "Home Assistant (10.0.0.199:8123) reachable"
|
||||
else
|
||||
log_warn "Home Assistant not reachable — ESP32 won't be able to connect"
|
||||
fi
|
||||
|
||||
if $ok; then
|
||||
log_ok "Environment ready"
|
||||
else
|
||||
log_warn "Some issues found — fix before flashing"
|
||||
fi
|
||||
}
|
||||
|
||||
# ─── Commands ─────────────────────────────────────────────────────────────────
|
||||
|
||||
cmd_flash() {
|
||||
local config="${1:-${DEFAULT_CONFIG}}"
|
||||
log_info "Compiling + flashing via USB: $(basename "${config}")"
|
||||
log_info "First compile downloads ESP-IDF toolchain (~500MB), takes 5-10 min..."
|
||||
cd "${ESPHOME_DIR}"
|
||||
"${ESPHOME}" run "$(basename "${config}")"
|
||||
}
|
||||
|
||||
cmd_ota() {
|
||||
local config="${1:-${DEFAULT_CONFIG}}"
|
||||
log_info "Compiling + OTA upload: $(basename "${config}")"
|
||||
cd "${ESPHOME_DIR}"
|
||||
"${ESPHOME}" run "$(basename "${config}")"
|
||||
}
|
||||
|
||||
cmd_logs() {
|
||||
local config="${1:-${DEFAULT_CONFIG}}"
|
||||
log_info "Streaming logs for: $(basename "${config}")"
|
||||
cd "${ESPHOME_DIR}"
|
||||
"${ESPHOME}" logs "$(basename "${config}")"
|
||||
}
|
||||
|
||||
cmd_validate() {
|
||||
local config="${1:-${DEFAULT_CONFIG}}"
|
||||
log_info "Validating: $(basename "${config}")"
|
||||
cd "${ESPHOME_DIR}"
|
||||
"${ESPHOME}" config "$(basename "${config}")"
|
||||
log_ok "Config valid"
|
||||
}
|
||||
|
||||
# ─── Main ─────────────────────────────────────────────────────────────────────
|
||||
|
||||
case "${1:-}" in
|
||||
flash)
|
||||
check_env
|
||||
echo ""
|
||||
cmd_flash "${2:-}"
|
||||
;;
|
||||
ota)
|
||||
check_env
|
||||
echo ""
|
||||
cmd_ota "${2:-}"
|
||||
;;
|
||||
logs)
|
||||
cmd_logs "${2:-}"
|
||||
;;
|
||||
validate)
|
||||
cmd_validate "${2:-}"
|
||||
;;
|
||||
*)
|
||||
check_env
|
||||
echo ""
|
||||
echo "Usage: $0 {flash|ota|logs|validate} [config.yaml]"
|
||||
echo ""
|
||||
echo " flash Compile + flash via USB (first time)"
|
||||
echo " ota Compile + flash via OTA (wireless, after first flash)"
|
||||
echo " logs Stream device logs"
|
||||
echo " validate Validate YAML config without compiling"
|
||||
echo ""
|
||||
echo "Default config: $(basename "${DEFAULT_CONFIG}")"
|
||||
;;
|
||||
esac
|
||||
|
||||
Reference in New Issue
Block a user